PRINCIPLE
- A frame with two disc modules equipped with blades performing a shear cut. The discs are driven by 2 hydraulic motors. All pre-pruner functions are centralized in a hydraulic block.
- Cutting modules opening and closing is controlled by a control switch.
- Working speed up to 10 km/h.
- Available with a stack of 6 to 24 disks with an interval of 60 or 90 mm.
TECHNICAL SPECIFICATIONS
RANGE
Narrow-spaced vineyards
MODEL
MP 122
FLOW RATE
14 to 40 l/min
SPPED OF ROTATION
280 trs/min
WEIGHT
150 kgs
ADVANTAGES
- The shape of the disc ensures a good grip on the vine shoots and a regular feeding of the machine, without damaging the tying wires.
- The 60 mm interval between the disks furthers the cleaning of the tying wires thanks to the cutting sections mounted on a carrier disk whose thickness prevents the wire from penetrating between the teeth of the cutting sections.
- Reduced maintenance, lightweight and low flow rate.
- Reduced projections thanks to a low rotational speed.
- The bottom section of the discs is totally flat, preventing any stripping of the spurs.
- Working speed up to 10 km/h.
SHARP DISK
- A circular disk with a sharp edge on one of the cutting modules, facing a toothed disk on the other module, ensures a clean sharp cut, without cracking of the wood. The cutting effect of the disk avoids pinching the wood, which is a common phenomenon in shear cutting. A specific configuration of this equipment ensures the respect of the environment (posts and tying wires).
